This tester simulates the lace under the reciprocal abrasion at a specified tension to test the longevity. The movable site is driven by motor at 60r/min to create reciprocally horizontal movement with a stroke of 35mm. The test will not be performed until specimen breaks and or reaches the rated   cycles.

NBS rubber abrasion testing machine is used to determine the resistance to abrasion of rubber products and sole materials. Mount specimens on this machine and rub specimens by the rotating abrasive paper, and then their abrasion condition will be checked out

This tester is capable of quickly assessing the waterproofing ability of the shoe lining cover,glove cover. Specimens, gripped through the pneumatic gripping device, are immersed into water and filled with air under specified pressure. The air bubbles will indicate the failure as long as any leakages occur.

Anti-piercing pad folding Determination,Mainly used for folding security insole board performance test

This machine is  the abrasion resistance of upper, lining, socking, and si types of shoe materials, particularly those made of fabric. The specimens are capably tested for pcs per time and are rubbed over the abrasive in all directions in a complex, repetitive pattern and, at the same time, the holder rotates.

It is used to determine the discolored extent for the dyed textile or dye leather by abrasion method. At first, coat abrasive hammer with dry or wet white cotton cloth then drive it to repeatedly abrade the specimen clamped on testing table for ten times within 10 seconds to examine grade of color dying firmness.

It is used to determine the discolored extent for the dyed textile or dyed leather by abrasion method. At first, coat abrasive hammer with dry or wet white cotton cloth then drive it to repeatedly abrade the specimen clamped on testing table for ten times with 10 seconds to examine grade of color dying firmness.