This machine is used to test tension, compression, bend, shearing force, adhesion, peeling force, tear strength, etc. of specimen, semi-product and finished product in the field of rubber, plastic,metal, nylon, fabric, paper, aviation, packing, architecture, electric appliance, automobile,… etc., which are the basic facilities for input quality control, physical inspection, material research.

To make the deterioration of vulcanized rubber plastic for figuring the changing rate of pulling and elongation before/after heating.

This machine is  the abrasion resistance of upper, lining, socking, and si types of shoe materials, particularly those made of fabric. The specimens are capably tested for pcs per time and are rubbed over the abrasive in all directions in a complex, repetitive pattern and, at the same time, the holder rotates.

It is used to determine the discolored extent for the dyed textile or dye leather by abrasion method. At first, coat abrasive hammer with dry or wet white cotton cloth then drive it to repeatedly abrade the specimen clamped on testing table for ten times within 10 seconds to examine grade of color dying firmness.

It is used to determine the discolored extent for the dyed textile or dyed leather by abrasion method. At first, coat abrasive hammer with dry or wet white cotton cloth then drive it to repeatedly abrade the specimen clamped on testing table for ten times with 10 seconds to examine grade of color dying firmness.