Phone:
0086-0769-82767811
0086-13929200954
| Image | Product Name |
|---|
This machine is used for testing the rubber ,foam static compression ,put it between the tablet,use the screw to fix.When the ovenware up to suitable temperature,Compress rubber and put it on
is used to determine the rebound-character of the specimen of rubber product, which endures a certain compression force under the specified time period. Put the specimen onto the test pan leverlly and grip it between two compression plates. Through the specified time period, take it out and cool it down then measure its center thickness to get its rebound rate.
This tester is the steel ball falling in soft foam plastic or other flexible material sample, measuring instruments, the height of the rebound in the test project is mainly used for the determination of polyester elastic material because of the elastic energy in the coefficient of restitution. By microcomputer and photoelectric technology, electromagnetic control, digital tube display directly back to the weak coefficient values.
This tester simulates the lace under the reciprocal abrasion at a specified tension to test the longevity. The movable site is driven by motor at 60r/min to create reciprocally horizontal movement with a stroke of 35mm. The test will not be performed until specimen breaks and or reaches the rated cycles.
It is used to determine the discolored extent for the dyed textile or dye leather by abrasion method. At first, coat abrasive hammer with dry or wet white cotton cloth then drive it to repeatedly abrade the specimen clamped on testing table for ten times within 10 seconds to examine grade of color dying firmness.
It is used to determine the discolored extent for the dyed textile or dyed leather by abrasion method. At first, coat abrasive hammer with dry or wet white cotton cloth then drive it to repeatedly abrade the specimen clamped on testing table for ten times with 10 seconds to examine grade of color dying firmness.
is used to test the bonding strength of the Inspection on the soles and uppers, with steady increase of separation forces make soles and uppers separation, to test the between the separation to assess quality of shoes.
The safety footwear industry requires specialized testing equipment to ensure that safety footwear products meet the required safety standards and provide adequate protection for workers.